You are here: Home Page » Audio » High-performance monitoring from Dynaudio's new PLM3A gold
Jun 9, 2011 8:00 AM
The PLM3A gold from Dynaudio is a new audio monitoring sequence consisting of a set of Dynaudio Acoustics M3A treble loudspeakers, a Lab.gruppen PLM 10000Q amplifier, and cutting-edge Lake and TC Electronic processing.
Dynaudio Acoustics has supposing first-class monitoring solutions for decades, and the M3A monitors are versed with exceedingly clean, energetic and arguable speakers in that familiar problems such as cone break up, thermal application and juncture misalignment have been probably eliminated. The M3A speakers underline a span of 300mm drum drivers that are immaculately complemented by two 150mm piston midrange drivers, with the high frequencies accommodated by a high-power chronicle of the 28mm Esotec T-330 DA architecture tweeter, deliberate by many to be the excellent architecture tweeter available. All of the drivers are ferrofluid cooled, a underline that is definitely unique to Dynaudio Acoustics.
The PLM 10000Q amplifier delivers 4 x 2300W at 4 ohms and is formed on technology from Lab.gruppen's famous FP+ series. PLM 10000Q is formed on Lab.gruppen's law Class TD amplifier pattern that offers the proven effectiveness of Class D loudness with the sonic homogeneity of Class B designs. A new route provides significantly larger current-carrying capabilities, and the Regulated Switch Mode Power Supply (R.SMPS) is optimized to broach full power during long low-frequency bursts together with sustain steady rail voltages notwithstanding vacillating line voltage.
Lastly, the Lake processor modules any offer correct settings for gain, delay, crossover slope, equalization and tying that supply unsurpassed power to correct, figure and optimize any sound source for any manage room. Exclusive algorithms are enclosed for lifted cosine equalization, in a line juncture crossovers, LimiterMax loudspeaker insurance and Iso-Float belligerent isolation.
No comments:
Post a Comment